Tempered Glass Supplier for the Philippines
Tempered glass in the Philippines costs USD 11-30 per sqm FOB Qinzhou, in thicknesses 8-19 mm, and reaches Manila in 25-40 days. China Glass Factory is a source factory in Qinzhou, China, supplying jumbo and difficult glass to Philippine fabricators, contractors and traders.
We supply heat-treated tempered safety glass to Philippine glazing contractors, importers and developers. Every price is quoted against your drawing and glass schedule — there is no list price, because the cost moves with thickness, panel size, edge work and quantity. Panels reach 3,660 × 12,000 mm, thickness 4–19 mm, with heat soak testing to EN 14179-1. One 20 ft container is the minimum, production 15–25 days, sea freight 7–12 days to Manila.
Quote against your drawing within one working day. Send the glass schedule, build-up and destination port.
WhatsApp / phone: +86 138 3303 3053
Email: info@cnglassworks.com
How is the price of tempered glass built?
There is no list price for architectural tempered glass, and any supplier who publishes one is quoting a panel that will not match your drawing. Four components make up the figure, and only one of them is set by us.
| Cost component | What it covers | What moves it |
|---|---|---|
| Glass and processing | Float glass, tempering, edge work, holes, notches, ceramic marking | Thickness, panel size against the furnace, number of operations |
| Packing | ISPM 15 wooden crates, corner protection, desiccant, moisture barrier | Panel size and mix — an oversized crate is not the same job as a standard one |
| Sea freight | Qinzhou or Shenzhen to Manila, FCL or LCL | Container type, shipment weight, season |
| Duty and VAT | 0–5% duty with Form E, plus 12% VAT | Declared value, assessed on the invoice — not on an estimate |
Indicative starting prices, clear tempered, FOB Qinzhou, glass only. They are reviewed quarterly and exclude packing, freight, duty, VAT and hardware. A binding figure comes only from a written quotation against your drawing.
| Thickness | Indicative from (USD / sq m) | Typical Philippine use |
|---|---|---|
| 8 mm (5/16 in) | USD 11 | Framed door leaf, shopfront glazing |
| 10 mm (3/8 in) | USD 14 | Frameless swing door, office partition |
| 12 mm (1/2 in) | USD 19 | Full-height leaf, balustrade infill |
| 15 mm (5/8 in) | USD 24 | Heavy-traffic entrance |
| 19 mm (3/4 in) | USD 30 | Glass floor, structural point-fixed |
| 6+6 laminated, 1.52 PVB | USD 28 | Overhead glazing, acoustic door |
Send the glass schedule, build-up and destination port. You get a written figure with the four components broken out, so you can see what each one costs before you commit.
Where the factory route actually wins
- Thick glass. At 12 mm and above, the gap between local processing and factory price widens sharply.
- Oversized panels. Local lines cap out below what a jumbo furnace can do. If the design needs a 12 m panel, there is no local option.
- Processed edges and holes. Polished edges, cut-outs and notches done before tempering, on CNC, priced per operation.
- Repeat specifications. Once a build-up is approved, the second and third container cost less than the first.
What sizes and thicknesses can you produce?
| Item | Range |
|---|---|
| Thickness | 4, 5, 6, 8, 10, 12, 15, 19 mm |
| Maximum jumbo panel | 3,660 × 12,000 mm (43.9 m²) |
| Maximum standard panel | 2,440 × 5,100 mm |
| Weight, one jumbo panel at 12 mm | About 2.1 tonnes |
| Heat soak testing | EN 14179-1 / GB 15763.4, 290 °C for 2 hours |
| Edge work | Flat polish, bevel, round, arris |
| Holes and notches | CNC before tempering — never after |
| Glass type | Clear, low-iron, tinted (grey, bronze, green, blue) |
| Marking | Permanent ceramic etch on request |
Sizes are manufacturing limits from furnace records, not project guarantees. Confirm against your structural and thermal design.
How long does delivery to Manila, Cebu and Davao take?
| Leg | Time | Note |
|---|---|---|
| Production after drawing approval and deposit | 15–25 days | Heat soak adds 2–3 days |
| Sea freight, South China to Manila | 7–12 days | Frequent sailings |
| Clearance at Manila | 3–7 days | Faster with documents complete before the vessel berths |
| Inter-island to Cebu or Davao | +3–7 days | Domestic feeder, or direct call where a service exists |
One 20 ft container carries about 20 tonnes of packed glass. At 10 mm (25 kg/m²) that is roughly 700 m² before crating and bracing reduce the usable load — we confirm the exact figure on the packing plan for your mix. Glass ships vertically in ISPM 15 treated wooden crates with the IPPC mark, corner protection and a moisture barrier.
What documents do I need, and what duty will I pay?
- Form E certificate of origin issued with every shipment — duty falls to 0–5% under the ASEAN–China FTA instead of the 5–15% MFN rate.
- VAT 12% on the duty-inclusive value, payable by the importer of record.
- Commercial invoice, packing list, bill of lading, mill and test certificates — full set, electronically in advance of arrival.
- PS licence or ICC: glass is a regulated product. Your broker files it; we provide the factory test reports and certificate copies needed to support the application. Tell us at enquiry stage if your consignee needs a specific document, because it changes what we can commit to.
What do Philippine buyers ask before the first order?
Is it cheaper to import tempered glass from China?
It depends on the panel, not on the country. Small standard cuts in a hurry are cheaper locally. Thick panels, oversized panels, polished edges and container volumes are cheaper from the factory, even after freight, duty and VAT.
Can a Chinese factory meet Philippine building requirements?
Tempered glass is tested to EN 12150 and GB 15763.2, and heat soak to EN 14179-1. What the Philippine side requires is a PS mark or an ICC per shipment, which is handled at import. We will tell you plainly which certificates we hold and which we do not — we do not describe a licence as current if it is not.
What if panels break in transit?
Panels are crated vertically, braced and photographed at loading. If breakage exceeds the agreed allowance on arrival, we replace against the loading photographs and the survey report. Agree the allowance in the contract before the deposit, not after the claim.
Can we mix products in one container?
Yes. A first order often combines tempered, laminated and insulating panels, and we plan the packing so the heaviest crates sit at the container floor line.
Tell us the build-up, the quantity and the destination port. You get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.
Which tempered glass fits each Philippine application?
- Glass doors — frameless swing and sliding leaves, 8–12 mm
- Glass partitions — office fit-out, 10–12 mm frameless
- Glass railing — balcony, stair and pool deck infill
- Glass supplier Manila — port, clearance and local delivery
Factory direct or through your Manila fabricator: tell us the application and we cut and temper to the measured size. Wholesale and custom project quantities are both fine — one 20GP, or tempered panels consolidated with other glass in a mixed 40HQ.
What other glass do you ship to the Philippines?
- Laminated safety glass — for facades and typhoon zones, PVB or SGP interlayer
- Insulating glass units — for the heat load, not just the noise
- Jumbo glass — panels to 3,660 × 12,000 mm
- Fire-rated glass — E, EW and EI classifications
- Low-E coated glass — note the 3,210 × 6,000 mm coating limit
- Hurricane-resistant assemblies
Request a tempered glass quotation — send the glass schedule, build-up and destination port.
Lead times on this page were verified against factory records in November 2026. Prices are issued only against a drawing or glass schedule, in writing, and are valid for 30 days from issue.