Glass supplier for Metro Manila
The short answer
Metro Manila is a curtain-wall and high-rise market, and the two things that decide whether a facade package succeeds are solar heat gain and how many panels it takes to cover the elevation. China Glass Factory supplies from the source: jumbo tempered panels up to 3,660 × 12,000 mm (43.9 m² each) to cut joint count on towers, Low-E insulating units to hold down cooling load, laminated glass with PVB or SGP for debris-exposed elevations, and fire-rated glass across EI / EW / E for stair and corridor separation. Quoted FOB Qinzhou or CIF Port of Manila, minimum one 20ft container, production 7–15 days after order confirmation. Philippine desk: info@cnglassworks.com.
What Metro Manila projects actually need
| Project type | Typical requirement | What we supply |
|---|---|---|
| Grade-A office towers (Makati CBD, BGC) | Large vision panels, low SHGC, tight flatness for a flush facade | Low-E insulating units, 6 Low-E + 12A + 6 to 8 + 16A + 8, with jumbo outer lites |
| Residential condominiums | Cost control with code-compliant safety glazing, balustrades and sliding doors | Tempered and laminated 6–12 mm, cut to schedule, mixed specs in one container |
| Hotels and mixed-use | Visual continuity between vision and spandrel, thermal comfort in guest rooms | Ceramic-printed spandrel matched in colour and thickness to the vision glass |
| Malls and retail podiums | Large spans, fewer mullions, impact safety at ground level | Jumbo tempered and laminated, up to 3,660 × 12,000 mm |
| Stairs, corridors, car parks | Fire separation under the Fire Code | Fire-rated glass in classes EI, EW and E |
| Retrofit and fit-out packages | Smaller quantities, many types, one delivery | Consolidated container of mixed build-ups, MOQ one 20ft |
Why solar heat gain, not wind, drives the specification in Manila
Metro Manila sits behind the Sierra Madre range, so it is less exposed to direct typhoon landfall than Cebu or eastern Samar, but it is not sheltered from heat. For a tower in Makati or BGC, the dominant cooling load is solar gain through the glazing, and the number that matters is the whole-window SHGC and U-value of the specified build-up — not the thickness printed on the drawing.
Practically: a Low-E insulating unit with argon reduces both the solar heat gain coefficient and the U-value at the same time, which cuts chiller load for the life of the building. Monolithic tinted glass reduces heat but does not reduce U-value, and it costs light. The trade-off should be made against the actual orientation — an east or west facade earns the coating, a shaded north facade may not.
Where typhoon glazing still applies
Even in Metro Manila, upper floors and exposed elevations face windborne debris, and laminated glass is the only assembly that retains the pane after breakage. The specification logic is the same as anywhere in the Philippines: laminated on the exterior position, interlayer type stated explicitly (PVB for standard commercial, SGP where the glass carries structural or post-breakage load), and thickness derived from the design wind pressure for that opening rather than from a table.
Shipping and clearance into Manila
| Item | Detail |
|---|---|
| Loading port | Qinzhou or Fangchenggang, Guangxi |
| Discharge port | Port of Manila (South Harbor / North Harbor); Subic as an alternative for northern Luzon |
| Terms | FOB Qinzhou or CIF Manila, quoted in USD and itemised by build-up, thickness and area |
| Duty | ACFTA preferential rate applies with a Form E certificate of origin; the position for the specific HS subheading is stated on every quotation |
| Documents | Invoice, packing list, bill of lading, certificate of origin (Form E), mill certificates; loading photographs per container |
| Packing | End-cap, cork pad, steel frame or fumigated crate depending on panel size |
Questions Metro Manila buyers ask
Can you ship glass directly to Manila?
Yes — FOB Qinzhou or CIF Port of Manila, with Form E for the ACFTA preferential rate. Clearance is handled by the buyer's broker.
What glass is usually specified for a Metro Manila curtain wall?
Low-E insulating units for vision glass, laminated on debris-exposed elevations, ceramic-printed spandrel for opaque areas, and fire-rated glass for stair and corridor separation.
Why does panel size matter on a Makati or BGC tower?
Every joint removed also removes a mullion, a sealant line, a thermal bridge and a leak path. Jumbo panels up to 3,660 × 12,000 mm cut all four, and the saving shows up in installation hours.
How do the BPS registrations apply?
Our test reports cover heat-strengthened and fully tempered flat glass; the PS licence itself is held by the local manufacturer. Ask for the current certificate copy and scope before a tender, since BPS renews periodically.
What is the minimum order and lead time?
One 20ft container, mixed build-ups consolidated; 7–15 days production after order confirmation.