Glass Doors for Philippine Shops, Offices, Clinics and Homes
China Glass Factory is a glass factory in Qinzhou, China, supplying tempered glass doors to Philippine shops, offices, clinics and homes. We cut, drill and polish panels from 4 mm (5/32 inch) to 12 mm (1/2 inch), up to 3,660 × 12,000 mm, with 7–15 day production and export packing for the Manila, Cebu and Davao run.
Send thickness, each door leaf width × height, piece count and destination port — we reply within 24 hours.
Glass door supplier Philippines: we are the factory, not a trading house. Every leaf is cut, drilled, edge-polished and tempered in our own plant in Qinzhou, China, then shipped direct to your site or your fabricator in Manila, Cebu or Davao. We supply the glass only — hinges, patch fittings, floor springs, tracks and handles are bought locally or imported by your contractor. Custom sizes are routine, and wholesale project quantities are fine: one 20GP, or door leaves consolidated with other glass in a mixed 40HQ.
How much does a glass door cost in the Philippines?
Two very different numbers get quoted for the same door: the glass, and the finished door. Philippine shops usually quote the finished door, supply and install, per square foot. We quote the glass only, per square metre, FOB Qinzhou. Both are below so you can compare like with like.
What a finished door costs locally (supply and install, 2026 market rates):
| Glass in the door | Local rate ₱/sq ft | Equivalent ₱/sq m | Typical use |
|---|---|---|---|
| 6 mm (1/4 in) clear tempered | 250–350 | 2,700–3,800 | Small fixed side panel, budget shopfront |
| 8 mm (5/16 in) clear tempered | 350–480 | 3,800–5,200 | Standard sliding and framed swing leaf |
| 10 mm (3/8 in) clear tempered | 450–650 | 4,800–7,000 | Frameless swing door, shopfront leaf |
| 12 mm (1/2 in) clear tempered | 650–850 | 7,000–9,100 | Full-height frameless leaf, heavy traffic |
| Edge polish (add-on) | ₱80–150 per linear ft | — | Mandatory on any exposed door edge |
A two-panel sliding door of 1.8 × 2.1 m with 8 mm tempered glass and a heavy track is commonly quoted at ₱18,000–28,000 installed. Figures above are the local retail band we track each quarter, not our price.
Our factory-direct price, glass only, FOB Qinzhou:
| Specification | Thickness (mm / inch) | Indicative from | What is included |
|---|---|---|---|
| Clear tempered | 8 mm / 5/16 in | USD 11 / sq m | Cut to size, flat polish, holes and notches, tempered |
| Clear tempered | 10 mm / 3/8 in | USD 14 / sq m | Cut to size, flat polish, holes and notches, tempered |
| Clear tempered | 12 mm / 1/2 in | USD 19 / sq m | Cut to size, flat polish, holes and notches, tempered |
| Laminated | 6+6 mm, 1.52 PVB | USD 28 / sq m | Cut to size, polished, holes, laminated and tempered |
| Low-iron ultra clear | 10 mm / 3/8 in | USD 18 / sq m | Greener edge, no green tint on thick leaves |
These are indicative starting prices, reviewed quarterly, FOB Qinzhou, before export packing. They exclude sea freight, insurance, Philippine duty and VAT, hardware and installation. A binding price comes only from a written quotation against your cutting list — the number moves with hole count, edge profile, panel size and quantity.
What moves the price most, in order: thickness, then hole and notch count (each one is CNC time before tempering), then edge profile (flat polish is cheapest, bevelled and pencil polish cost more per linear foot), then glass type (low-iron and tinted carry a premium over standard clear), and finally quantity — a full 20GP lowers the per-square-metre rate because crating, fumigation and documentation are spread over more glass.
What thickness does a glass door need?
In the Philippines a glass door is tempered by law and by common sense: it must break into blunt pieces, not shards. Thickness decides stiffness, and stiffness decides whether the door still closes straight after a year.
| Thickness (mm) | Thickness (inch) | Door application | Note |
|---|---|---|---|
| 4 mm | 5/32 in | Not a door | Cabinet and display backing only |
| 5–6 mm | 3/16–1/4 in | Fixed side panel, wardrobe sliding leaf | Never a swing leaf — too flexible at the hinges |
| 8 mm | 5/16 in | Standard framed and semi-frameless door, up to 900 mm wide | Cheapest leaf that still feels solid |
| 10 mm | 3/8 in | Frameless swing door, shopfront leaf, office door | The most common factory spec for Philippine fit-outs |
| 12 mm | 1/2 in | Full-height frameless leaf, doors over 1,000 mm wide | Stiff enough for a floor spring with no frame |
| 15 mm | 5/8 in | Heavy traffic entrance, mall shopfront | Needs engineered floor spring, not patch hinges |
| 19 mm | 3/4 in | Structural and blast-rated entrance | Design calculation required |
| 6+6 laminated, 1.52 PVB | ≈ 1/2 in total | Door above 2,400 mm, acoustic door, overhead glass | Stays in the frame if it breaks — required over walkways |
| 6+12A+6 insulated | ≈ 15/16 in total | External door of an air-conditioned space | Heat and noise control together |
The rule that saves the job: a 10 mm leaf is comfortable to 2,400 mm high and 1,000 mm wide. Beyond either number the leaf twists, the hinges carry more load than they were rated for, and the door starts scraping the floor within a year. Go to 12 mm, or use 6+6 laminated.
Which door type fits your opening?
Thickness is half the decision. The other half is how the leaf hangs, because that decides what holes we drill and where.
| Type | How it hangs | Best for | What to send us |
|---|---|---|---|
| Frameless swing | Patch fittings and a floor spring, or top and bottom pivot | Shop entrance, office door, clinic | Floor spring model and the pivot offset |
| Semi-frameless | Aluminium U-channel top and bottom | Budget fit-out, back-of-house door | Channel width so the leaf fits the rebate |
| Framed | Full aluminium frame supplied locally | Wet areas, service corridors | Frame rebate depth and stile width |
| Sliding | Top track and rollers, or bottom rollers | Shopfront, balcony, small office | Track type, clear opening, number of panels |
| Folding / bi-fold | Top track with hinged panel joints | Cafe frontage, wide opening | Panel count and stacking direction |
| Pivot / balanced | Floor and head pivot | Heavy leaf, hotel lobby | Leaf weight limit of the pivot |
Every type above is the same glass, cut and drilled differently. Send the hardware drawing or the model number and we confirm the hole pattern against it before cutting — that step is what prevents a delivery of leaves that no fitter can hang.
How is the glass packed and delivered to Manila, Cebu and Davao?
Door leaves are the most damaged glass item in transit, because they are tall, narrow and handled twice. Three things prevent breakage: they travel on edge, they never touch each other, and each leaf is labelled to its opening.
| Item | Detail |
|---|---|
| Packing | Cork pads between leaves, plastic corner protectors on all four corners, individual foam wrap, fumigated timber crate, steel banding |
| Standing | Leaves travel on edge, never flat — flat stacking is how door glass arrives chipped at the corner where the hinge goes |
| Marking | Every crate and every leaf labelled with the opening reference and measured size, matching the cutting list |
| Loading | Photographs of each crate and each container at loading |
| Port of loading | Qinzhou / Beihai |
| Production | 7–15 days after deposit |
| Documents | FORM E under the ASEAN–China FTA, packing list per crate |
| Minimum | One 20GP, or door leaves consolidated with other glass in a mixed 40HQ |
| Destination | Covers | Production | Sea transit | Clearance |
|---|---|---|---|---|
| Manila | Metro Manila, Cavite, Laguna, Batangas, Clark, Subic | 7–15 days | 5–10 days | 3–7 days |
| Cebu | Cebu, Iloilo, Bacolod, Bohol, Dumaguete | 7–15 days | 5–10 days + 2–4 days feeder | 3–7 days |
| Davao | Davao, Cagayan de Oro, General Santos | 7–15 days | 5–10 days + 3–5 days feeder | 3–7 days |
Transit figures are the forwarder's numbers for the Qinzhou–Manila lane. The feeder add-on for Cebu and Davao is confirmed against the booking at quotation, because it depends on which carrier takes the container that week. We do not quote a transit time we cannot book.
What else do buyers call a glass door?
Glass door, tempered glass door, toughened glass door, frameless glass door, swing glass door, sliding glass door, shopfront glass door, office glass door, patch fitting door, storefront door — all the same product, cut from the same 4–19 mm range at the same factory. Tell us the application, the opening size and the hardware, and we confirm the thickness and hole layout rather than guess from the name.
How do I get a glass door quotation?
| Channel | Response | Detail |
|---|---|---|
| Viber | Within 2 hours in working hours | PENDING — Viber number to be supplied |
| Messenger | Within 2 hours in working hours | PENDING — page link to be supplied |
| Phone | Working hours, Manila time | +86 138 3303 3053 |
| Within 24 hours | info@cnglassworks.com |
Four things give you a firm price: thickness, each leaf width × height and piece count, edge and hole details or the hardware model, destination port (Manila / Cebu / Davao). With those four we return an FOB or CIF price within 24 hours, and a cutting list for your written confirmation before production.
Questions Philippine buyers ask first
How much does a glass door cost in the Philippines?
Locally, supply and install runs about ₱250–850 per square foot depending on thickness — a 1.8 × 2.1 m two-panel sliding door with 8 mm tempered glass is commonly quoted at ₱18,000–28,000 installed. From us, glass only, factory direct: from USD 11 per square metre FOB Qinzhou for 8 mm, from USD 14 for 10 mm, from USD 19 for 12 mm. Freight, duty, VAT, hardware and installation sit outside that figure.
What thickness should a glass door be?
8 mm (5/16 inch) for a framed or semi-frameless leaf up to 900 mm wide. 10 mm (3/8 inch) for a frameless swing door and for shopfront leaves — this is the specification we ship most to the Philippines. 12 mm (1/2 inch) for a full-height frameless leaf or a door over 1,000 mm wide. Above 2,400 mm high, go up one thickness or switch to a 6+6 laminated leaf.
Can the handle and hinge holes be drilled after the glass arrives?
No. Once tempered, the glass shatters if it is drilled, cut or notched — there is no way to add a hole on site. Every hinge hole, lock case, patch fitting and handle hole has to be on the drawing before tempering. That is why we issue a cutting list for written confirmation and do not start production until it is signed back.
Do you supply the hinges, floor spring and handles?
No. We supply the glass only, cut, drilled and tempered. Patch fittings, floor springs, pivots, tracks and handles are specified by your fabricator or contractor and bought locally, which also keeps the warranty on the hardware with the party who installs it. Send us the hardware drawing or model number and we drill to it.
Related glass
- Tempered glass — why a door must be tempered
- Glass partitions for offices, clinics and shops
- Glass railing for balconies, stairs and pool decks
- All glass types supplied to the Philippines
Request a glass door quotation — send thickness, leaf sizes, hardware details and destination port.