Glass Partitions for Philippine Offices, Clinics and Shops

China Glass Factory is a glass factory in Qinzhou, China, supplying tempered glass partitions, frameless or framed, to Philippine offices, banks, clinics and shop fit-outs. We cut, polish, drill and temper panels from 4 mm to 19 mm, up to 3,660 × 12,000 mm, with 7–15 day production and export packing built for the Manila, Cebu and Davao run.

Fastest way to get a price: Viber Messenger Call
Send thickness, panel sizes and destination port — quote within 24 hours.

What thickness should a glass partition be?

ThicknessBuild-upWhere it is usedNote
4 mm (5/32 in)SingleNot a partition on its ownOnly as a laminated inner ply or a cabinet back
5–6 mm (3/16–1/4 in)Single or 5+5 laminatedSmall fixed screen, shop display backingToo flexible above 1.2 m wide without a frame
8 mm (5/16 in)Single, framedBudget office cubicle, half-height screenCheapest option that still passes as safety glass
10 mm (3/8 in)Single, framelessThe default for frameless office partitionsPatch fittings or a top and bottom channel
12 mm (1/2 in)Single, framelessFull-height partition, partition door leaf, panels over 3 mStiff enough to hang a door without a frame
15 mm (5/8 in)SingleStructural glazing, tall lobby screenNeeds engineered fixings, not patch fittings
19 mm (3/4 in)SingleGlass floor, stair tread, point-fixed wallStructural design required
5+5 / 6+6 laminatedPVB 0.76–1.52 mmAcoustic partition, overhead glass, door leafStays in the frame if it breaks
6+12A+6 IGUSealed unitExternal partition, air-conditioned boundaryHeat and noise together

Two rules that decide the job more often than the thickness does:

  1. Frameless height. A 10 mm frameless panel is comfortable to about 3,000 mm. Above that the panel deflects and the joints open — go to 12 mm and add a top channel, or break the wall into two tiers with a transom.
  2. A door changes everything. A frameless swing door in a partition needs a 12 mm leaf with patch hinges; the fixed panels beside it stay at 10 mm. Putting a door in a 10 mm wall is the single most common mistake we see on drawings sent to us from Manila.

Framed, frameless or demountable — which type fits your opening?

TypeHow it is fixedBest forWhat to send us
FramelessPatch fittings, top and bottom channel, or point fixingsOffices, clinics, showrooms — the clean lookHeight, width, and whether there is a door
Semi-framelessAluminium U-channel top and bottom onlyBudget fit-outs, half-height screensChannel width so we can size the glass to fit it
FramedFull aluminium frame supplied locallyWet areas, high-traffic corridorsFrame rebate depth
DemountableProprietary post-and-glass systemRental floors that get reconfiguredThe system brand — we cut to its module
Sliding / top-hungTrack and rollers, glass drilled for fittingsSmall offices, consultation roomsTrack type and the clear opening you want

We supply the glass only: cut, edge-polished, holes and notches drilled, then tempered. Frames, patch fittings, hinges and tracks are bought locally or imported by your contractor — we will confirm the hole pattern against the hardware drawing you send.

How much noise does a glass partition actually block?

Sound reduction is where most partition quotes go wrong, because the frame and the seals matter as much as the glass.

Build-upRw (laboratory)What it feels like
10 mm singleabout 31 dBNormal speech audible as a murmur next door
12 mm singleabout 33 dBMeeting room to corridor, workable
6+6 laminated, 1.52 PVBabout 38 dBTwo adjacent offices, conversation not understood
6+12A+6 IGUabout 35 dBExternal wall of a call centre
5+5 laminated + 50 mm air gap + 5+5about 45 dBStudio, clinic consultation room

Rule of thumb: if privacy matters, seal the perimeter first and buy laminated second. A 12 mm panel in a frame with a 5 mm gap around it performs worse than a 10 mm panel with proper gaskets. Figures above are published laboratory values for the glass alone, not a site test.

How is the glass packed and delivered to the Philippines?

ItemDetail
PackingCork pads between panels, edge protectors on all four sides, individual foam wrap, fumigated timber crate, steel banding
StandingPanels travel on edge, never flat — flat stacking is how partition glass arrives chipped
MarkingEvery crate labelled with the room, the panel number and the measured size, matching the cutting list
LoadingPhotographs of every crate and every container
Port of loadingQinzhou / Beihai
Production7–15 days after deposit
MinimumOne 20GP, or a mixed 40HQ with other glass in the same container
DocumentsFORM E prepared by us under the ASEAN–China FTA; packing list per crate
DestinationCoversProductionSea transitClearance
ManilaMetro Manila, Cavite, Laguna, Batangas, Clark, Subic7–15 days5–10 days3–7 days
CebuCebu, Iloilo, Bacolod, Bohol7–15 days5–10 days + 2–4 days feeder3–7 days
DavaoDavao, Cagayan de Oro, General Santos7–15 days5–10 days + 3–5 days feeder3–7 days

Transit figures are the forwarder's numbers for the Qinzhou–Manila lane; the feeder add-on for Cebu and Davao is confirmed against the booking at quotation, because it depends on which carrier takes the container that week. We do not quote a transit time we cannot book.

What else do buyers call a glass partition?

All of the above are cut from the same 4–19 mm range at the same factory. If your drawing says "toughened" and our quote says "tempered", it is the same glass.

Get a glass partition quotation

ChannelResponseDetail
ViberWithin 2 hours in working hoursPENDING — Viber number to be supplied
MessengerWithin 2 hours in working hoursPENDING — page link to be supplied
PhoneWorking hours+86 138 3303 3053
EmailWithin 24 hoursinfo@cnglassworks.com

Three numbers give you a firm price: thickness, each panel width × height and piece count, destination port (Manila / Cebu / Davao). With those three we return an FOB Qinzhou or CIF price in USD within 24 hours.

Questions Philippine buyers ask first

How much does a glass partition cost per square metre in the Philippines?

We quote per project, not per square metre, because the price moves with thickness, hole count, edge work and packing. As an order-of-magnitude: a 10 mm frameless single-glazed partition is the cheapest build that still looks frameless, and a 6+6 laminated acoustic build is roughly double the glass cost of the 10 mm single. Send the drawing and we return an itemised price within one working day.

Can you make a frameless partition 3.5 metres high?

Yes, but not in 10 mm. Above 3,000 mm we move to 12 mm with a top channel, or split the wall at 2,400–2,800 mm with a transom. A 10 mm panel at 3.5 m high deflects under hand pressure and the vertical joints open within a year — this is the failure we are asked to replace most often.

What is the minimum order for a custom partition?

There is no fixed minimum. One 20GP is fine, and partition glass is often shipped inside a mixed 40HQ together with tempered, laminated or mirror glass. A single-room order is uneconomic only because of crating and freight, not because of a factory minimum.

Related glass

Request a glass partition quotation — send thickness, panel sizes and destination port.