Jumbo Glass for the Philippines — Panels to 3,660 × 12,000 mm
43.9 m² in one panel · 2.1 tonnes at 12 mm · Removes a horizontal joint on a four-storey module
China Glass Factory tempers and laminates jumbo glass up to 3,660 × 12,000 mm — 43.9 m² and about 2.1 tonnes at 12 mm. On a typical four-storey module that removes one horizontal joint, where water ingress and thermal movement concentrate. Local Philippine tempering lines cannot reach this size. Production 20–28 days, sea freight 7–12 days to Manila.
Quote against your drawing within one working day. Send the glass schedule, build-up and destination port.
WhatsApp / phone: +86 138 3303 3053
Email: info@cnglassworks.com
What drives the price of jumbo glass?
Jumbo glass is priced per panel, not per square metre of glass, because the cost sits in handling and packing rather than in the raw material.
| Cost component | What it covers | What moves it |
|---|---|---|
| Glass and processing | Float glass, tempering, edge work | Thickness and whether the panel is laminated |
| Furnace loading | Whether the panel fits the usable bed without a second pass | Panel dimensions against 3,660 × 12,000 mm — a panel near the limit occupies the furnace alone |
| Crating | A-frame or crate built for the panel, corner protection, bracing | Panel size and weight; a 2.1 tonne panel needs its own frame, not a shared crate |
| Freight and handling | Sea freight plus the lifting plan at both ends | Whether a crane is available at the destination |
Jumbo is quoted per panel with the packing and lifting plan attached. Send the elevation and we return a written price within one working day.
Jumbo glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Panels are also quoted per piece with the lifting and packing plan, because freight is set by the largest panel.
How large a panel can you produce?
| Item | Range |
|---|---|
| Maximum jumbo panel | 3,660 × 12,000 mm |
| Area, one panel | 43.9 m² |
| Thickness | 6, 8, 10, 12, 15, 19 mm |
| Weight per panel at 12 mm | About 2.1 tonnes |
| Build-ups | Monolithic tempered, or laminated with PVB or SGP |
| Maximum standard panel, for comparison | 2,440 × 5,100 mm |
| Off-line Low-E jumbo limit | 3,210 × 6,000 mm — the coating line caps it before the furnace does |
Why is a bigger panel worth the freight?
Jumbo glass costs more per square metre and is harder to ship. It still wins on the right project, for three reasons that show up on the building rather than on the quotation.
- One joint instead of two. A 12 m panel covers a four-storey module without a horizontal splice. Every splice is a line where water can enter, where thermal movement concentrates and where the facade needs a structural mullion.
- Fewer mullions, more glass. Fewer joints mean fewer mullions, which means less aluminium, less thermal bridging and a cleaner elevation. On a high-end lobby or a curtain wall that is the whole point.
- Fewer panels to install. Six jumbo panels replace eighteen standard ones. Less site handling, fewer sealant joints, fewer opportunities for damage during installation.
How is a 2.1 tonne panel packed and shipped?
| Stage | What happens |
|---|---|
| Packing | Panel stands vertically in an A-frame crate with timber battens isolating each face, corner protection, desiccant and a moisture barrier. Timber is ISPM 15 treated with the IPPC mark. |
| Container loading | The A-frame is braced to the container floor and walls. Loading photographs are taken before the doors close and sent with the packing list. |
| At the port | The receiver needs a forklift or crane rated for 2.1 tonnes plus the frame. A standard 3-tonne forklift with long forks is normally enough; a pallet truck is not. |
| On site | Panels are lifted with a vacuum lifter rated above the panel weight, never by hand and never with slings through the frame. |
One 20 ft container carries about 20 tonnes. That is roughly nine 12 mm jumbo panels by weight, fewer once the A-frames are counted — so the container plan is built per project rather than assumed.
Questions Philippine buyers ask first
What is the largest glass panel you can make?
3,660 × 12,000 mm, which is 43.9 m² and about 2.1 tonnes at 12 mm. For a coated panel the limit drops to 3,210 × 6,000 mm because the off-line coating line caps it before the furnace does.
How many jumbo panels fit in a container?
Weight is the binding constraint, not volume. A 20 ft container holds about 20 tonnes, which is roughly nine 12 mm jumbo panels before the A-frames are counted. We build the container plan from the actual panel list.
What if a jumbo panel breaks in transit?
The loading photographs and the survey report decide it. Jumbo panels are packed one per frame rather than stacked, which limits collateral damage — a break in a shared crate can take the whole stack. Agree the breakage allowance in the contract before the deposit.
Can a jumbo panel be laminated?
Yes, to the same 3,660 × 12,000 mm, but the autoclave time is longer and the panel is heavier — plan on about 2.6 tonnes at a 12.38 mm build-up rather than 2.1 tonnes.
Is jumbo glass available with Low-E coating?
Only up to 3,210 × 6,000 mm for off-line coating. If the design needs a 12 m panel with solar control, the options are a tinted body rather than a coated one, or a split panel with a visible joint. Tell us the requirement at design stage, not at order stage.
Tell us the build-up, the quantity and the destination port. You get a specification review and a written price within one working day — reviewed by an engineer, not a bot.
Other glass we ship to the Philippines
Lead times on this page were verified against factory records in November 2026. Prices are issued only against a drawing or glass schedule, in writing, and are valid for 30 days from issue.