Insulating Glass Units for the Philippines
Double and triple glazing · Argon fill · Warm-edge spacer · Priced against your schedule
China Glass Factory builds double and triple glazed units in Qinzhou for Philippine projects. Units are calculated to EN 673, argon-filled on request, with a warm-edge spacer and a dual seal, up to 3,300 × 8,000 mm because the press caps it. Production 18–25 days, sea freight 7–12 days to Manila, priced against your schedule.
Quote against your drawing within one working day. Send the glass schedule, build-up and destination port.
WhatsApp / phone: +86 138 3303 3053
Email: info@cnglassworks.com
What drives the price of an insulating unit?
An insulating unit has more components than a monolithic panel, and each one is priced separately. There is no list price because the cavity, the gas and the spacer are all specified per project.
| Cost component | What it covers | What moves it |
|---|---|---|
| Glass panes | Two or three panes, thickness per the thermal calculation | Thickness, whether one pane is laminated or Low-E coated |
| Cavity and gas | 6, 9, 12 or 16 mm air or argon | Target U-value — argon and a wider cavity cost more and perform better |
| Spacer and seal | Aluminium or warm-edge spacer, butyl primary, polysulphide or silicone secondary | Warm-edge adds cost and reduces condensation at the edge |
| Packing and freight | ISPM 15 crates, sea freight to Manila | Unit size — a 3,300 × 8,000 mm unit needs a different crate and handling plan |
Send the elevation, the target U-value and the destination port. You get a written price with each component broken out, within one working day.
Insulating glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Cavity width, glass type, spacer and unit size are costed separately, so we quote the build-up you specify.
What units and sizes can you supply?
| Item | Range |
|---|---|
| Glass thickness, each pane | 4, 5, 6, 8, 10, 12, 15, 19 mm |
| Cavity | 6, 9, 12, 16 mm |
| Total unit thickness | Typically 16–48 mm |
| Maximum unit size | 3,300 × 8,000 mm |
| Spacer | Aluminium box or warm-edge (TGI-type) |
| Gas fill | Air standard, argon on request |
| Seal | Dual seal — polyisobutylene primary, polysulphide or silicone secondary |
| Options | Low-E coating, laminated inner pane, tinted or low-iron glass |
Sizes are manufacturing limits from press records, not project guarantees. Confirm against your structural and thermal design.
Why does the Philippines need the cavity for heat, not cold?
In a European project the insulating unit exists to keep heat in. In the Philippines it exists to keep heat out, and that changes the specification.
- Solar gain dominates. A clear double-glazed unit blocks conducted heat but still lets radiant heat through. In Manila the radiant component is the larger one, so a Low-E coating or a tinted outer pane matters more than a wider cavity.
- Condensation forms on the room side, not inside. Air-conditioned interiors at 22 °C against 33 °C outside and high humidity put the dew point on the warm face of the glass. A warm-edge spacer lifts the edge temperature and pushes the condensation line outward.
- Inter-island delivery punishes weak seals. A unit that travels by feeder to Cebu or Davao flexes more than one delivered inside Luzon. The secondary seal is what survives that, so we do not substitute a single-seal construction to hit a price.
What determines the U-value of a unit?
The U-value is a centre-of-glass figure calculated to EN 673 or ISO 10292. It is not the number that decides whether the facade complies — that one includes the frame and the spacer, and is usually 15–30% worse.
| Build-up | Centre-of-glass U, approximate |
|---|---|
| 6 mm + 12 mm air + 6 mm, clear | 2.7–2.8 W/m²K |
| 6 mm + 12 mm argon + 6 mm, clear | 2.5–2.6 W/m²K |
| 6 mm Low-E + 12 mm argon + 6 mm | 1.6–1.8 W/m²K |
| 6 mm Low-E + 16 mm argon + 6 mm Low-E | 1.3–1.5 W/m²K |
Indicative figures for comparison only. The value that goes on the drawing must be calculated for your exact build-up and spacer by the facade engineer.
Questions Philippine buyers ask first
Will the units fog up internally?
Only if the seal fails. A dual-seal unit with properly dehydrated desiccant holds its cavity for decades; a single-seal unit in a hot humid climate often does not. If a unit fogs, it is a warranty claim against the seal, and we need the batch number from the spacer label to trace it.
Can you make an insulating unit larger than 3,300 × 8,000 mm?
No. The press sets that ceiling. If your design needs a bigger panel, the options are a monolithic or laminated jumbo panel to 3,660 × 12,000 mm, or a split unit with a structural joint — and that is a design decision, not a purchasing one.
Should the inner pane be laminated?
For overhead glazing, balustrades and anything above a walkway, yes. Laminated inner panes are the normal specification for Philippine high-rise because they hold the fragments if the unit breaks. For a plain vertical window it is optional.
Do I need argon?
If the target U-value is below about 2.4 W/m²K, yes — air alone will not get you there. Argon adds a modest cost per square metre and is not worth skipping on a project that is being modelled for compliance.
How long does delivery take?
18–25 days production after drawing approval and deposit, then 7–12 days sea freight to Manila. Cebu and Davao need an inter-island leg, or a direct call where a service exists. Plan 30–45 days door to port.
Tell us the build-up, the quantity and the destination port. You get a specification review and a written price within one working day — reviewed by an engineer, not a bot.
Other glass we ship to the Philippines
- Tempered glass
- Laminated safety glass
- Jumbo glass to 3,660 × 12,000 mm
- Fire-rated glass
- Low-E coated glass
Lead times on this page were verified against factory records in November 2026. Prices are issued only against a drawing or glass schedule, in writing, and are valid for 30 days from issue.