Reflective Glass for Philippine Facades, Shopfronts and Spandrels
China Glass Factory is a glass factory in Qinzhou, China, supplying solar-control reflective glass from 4 mm to 19 mm in panels up to 3,660 × 12,000 mm, hard coat or soft coat, for facades, shopfronts and spandrels. We temper, heat-strengthen, laminate and seal into insulating units, with 7-15 day production and export crating to Manila, Cebu and Davao.
Source factory. Export specialist. Jumbo and difficult glass.
Send thickness, coating type, sizes and destination port — reply within 24 hours.
Reflective glass supplier Philippines: the coating is applied, and the glass is tempered, heat-strengthened or sealed into units, in our own plant in Qinzhou, China — we are not a trading company reselling someone else's sheet.
Hard coat or soft coat — which one fits where the glass sits?
| Hard coat (pyrolytic, on-line) | Soft coat (off-line, sputtered) | |
|---|---|---|
| Where the coating is applied | During float production, at the tin bath | After float, in a vacuum sputtering line |
| Can it be heat-treated afterwards? | Yes — tempering, heat-strengthening and bending are done after coating | Only if the product is a temperable soft coat; otherwise no |
| Can it be used monolithic (single pane)? | Yes | No — must be sealed inside an IGU, coating on surface #2 |
| Edge deletion required? | No | Yes, before IGU assembly |
| Durability against handling and salt air | Higher | Lower — protected inside the unit |
| Typical use | Exposed single glazing, coastal jobs, spandrel, shopfront | High-performance IGU for air-conditioned towers |
Rule of thumb for Philippine projects: if the reflective pane goes up as a single sheet exposed to weather, specify hard coat. If it goes into a sealed IGU for a curtain wall, soft coat gives the better SHGC and U-value — but the unit has to be assembled properly, with edge deletion, and sealed.
What thickness range do you supply?
| Thickness (mm) | Thickness (inch) | Weight (approx.) | Typical use |
|---|---|---|---|
| 4 mm | 5/32 inch | 10 kg/m² | Interior partitions, light shopfronts, furniture |
| 5 mm | 3/16 inch | 12.5 kg/m² | Shopfront infill, small glazed screens |
| 6 mm | 1/4 inch | 15 kg/m² | Most common facade and shopfront thickness |
| 8 mm | 5/16 inch | 20 kg/m² | Larger spans, higher wind load |
| 10 mm | 3/8 inch | 25 kg/m² | Curtain wall vision glass, tall panels |
| 12 mm | 1/2 inch | 30 kg/m² | Structural glazing, heavy wind zones |
| 15 mm | 5/8 inch | 37.5 kg/m² | Specialty facades, on request |
| 19 mm | 3/4 inch | 47.5 kg/m² | Heavy structural work, on request |
Reflective glass price Philippines: from USD ___ per sqm FOB Qinzhou. Coated glass is quoted per project — coating type, heat treatment and IGU assembly move the number more than the glass area does.
Which heat and glare numbers actually matter?
Reflective and solar-control coatings are specified by three figures, not by colour:
| Figure | What it tells you | Standard |
|---|---|---|
| VLT (visible light transmission) | How much daylight gets in | EN 410 |
| VLR (visible light reflection, exterior) | How mirror-like it looks from outside | EN 410 |
| SHGC / g-value | Total solar heat admitted — the number that drives air-conditioning load | EN 410 |
| U-value | Heat flow through the glass itself | EN 673 |
Typical architectural solar-control coatings land roughly in the VLT 8–40% and exterior VLR 10–40% band. The exact figure for the product you order is stated on its data sheet, and we quote against that sheet — we do not quote a number we cannot back with a test report.
Why does thermal stress crack reflective glass?
A coated, heat-absorbing pane runs hotter than clear glass. On a spandrel — the opaque band between vision panels — the glass is often part-framed and part-exposed, so one edge stays hot while the other stays cool. That temperature differential builds tensile stress at the edge, and annealed glass eventually cracks from it.
This is the most common reflective-glass failure on tropical facades, and it is not a coating defect. Two ways to design it out:
| Fix | How it works |
|---|---|
| Specify heat-strengthened or tempered for spandrel and any partially shaded pane | The higher surface compression absorbs the differential |
| Keep the coating out of the hot spot | Put the soft coat on surface #2 of an IGU rather than on an exposed single pane |
We produce both, which matters when one facade needs vision glass and spandrel glass from one supplier on one delivery.
What reflective glass do you produce?
| Item | Range |
|---|---|
| Thickness | 4 / 5 / 6 / 8 / 10 / 12 mm reflective; up to 19 mm on the base glass |
| Max panel | 3,660 × 12,000 mm |
| Coating type | Hard coat (pyrolytic) / soft coat (off-line sputtered, IGU only) |
| Colour family | Silver, grey, bronze, blue, green, and custom tint orders |
| Processing after coating | Temper, heat-strengthen, laminate (PVB / SGP), IGU, edge work, holes and cut-outs per drawing |
| Base glass | Clear / ultra-clear float |
| Packing | End-capped wooden crates, cork or foam separation, sea-worthy for Manila and Cebu discharge |
| Lead time | 7–15 days after deposit |
| MOQ | One 20GP, or a mixed 40HQ — thicknesses and types can be combined |
How long is delivery to Manila, Cebu and Davao?
| Port | Coverage | Production | Sea freight (approx.) | Packing |
|---|---|---|---|---|
| Manila | Metro Manila, Cavite, Laguna, Batangas, Central Luzon | 7–15 days | 7–12 days | End-capped crate, cork or foam separation, crated upright |
| Cebu | Visayas — Cebu, Iloilo, Bacolod | 7–15 days | 10–15 days | As above, plus moisture barrier film for transhipment |
| Davao | Mindanao — Davao, Cagayan de Oro, General Santos | 7–15 days | 14–20 days | As above, reinforced crate for the longer feeder leg |
FORM E is issued by us, so the shipment enters under the ASEAN–China agreement rate rather than MFN. A loading plan with CBM and lead time travels with the quotation, so freight can be costed before you commit. Coated glass certificates and the test reports behind them are sent with the quotation; the importer still files the Statement of Confirmation (SOC) per shipment with the BPS.
What else do buyers call reflective glass?
Reflective glass Philippines, reflective glass factory Philippines, solar control glass, solar-reflective glass, mirror glass facade, coated glass, hard coat reflective, soft coat reflective, spandrel glass, one-way glass — trade names vary by market and by whether the buyer is thinking about the coating, the colour or the effect. Tell us the application, the orientation and the SHGC you need and we will confirm which coating fits.
How do I get a reflective glass quotation?
| Channel | Response | Detail |
|---|---|---|
| Viber | Within 2 hours in working hours | PENDING — Viber number to be supplied |
| Messenger | Within 2 hours in working hours | PENDING — page link to be supplied |
| Within 24 hours | info@cnglassworks.com |
Send four things for a firm price: thickness, coating type and colour, sizes and piece count, destination port.
What do Philippine buyers ask first?
Is reflective glass the same as Low-E?
No. Reflective glass reflects a broad band of solar energy, including visible light, which is why it looks mirror-like and reduces both heat and daylight. Low-E glass is tuned to reflect long-wave infrared — it cuts heat loss and solar heat gain while staying visually clear. Many facades use Low-E for vision glass and reflective for spandrel; some use a single product that does both.
Can I use 6 mm reflective glass on a shopfront?
Yes, as tempered or heat-strengthened 6 mm — not annealed. A single annealed reflective pane in a framed shopfront is the classic thermal-stress crack, and it will fail at the edge on the sunny side.
Does the mirror finish fade?
A hard coat does not delaminate or fade in normal service; it is part of the glass surface. A soft coat is protected inside the sealed unit — if the seal fails and moisture reaches the coating, the coating is what fails first. That is why unit quality, not coating brand, decides service life.
How do you ship to Cebu or Davao, not just Manila?
Same crates, same packing; the difference is the discharge port and the feeder leg. We quote CIF or FOB Qinzhou and give you the loading plan, so your forwarder can price the domestic leg.
What is the smallest order?
One 20GP, and you can mix thicknesses and product types inside it. A mixed 40HQ is common for a first order that covers vision glass, spandrel and interior glass in one shipment.
Related glass
- Low-E coated glass — for the vision glass in the same facade
- Insulating glass units — where soft coat has to be sealed
- Jumbo glass — 3,660 × 12,000 mm without a joint
- Tempered glass — safety glass for doors, balustrades and shopfronts
Send your glass schedule — we reply with a loading plan, CBM and lead time.