Low iron · acid-etched

Ultra clear and
acid-etched frosted glass

China Glass Factory supplies low-iron ultra clear glass from Qinzhou, China, at 91 % or better light transmission and 0.015 % iron or less, in 3 to 19 mm up to 3,300 × 9,000 mm. The same line acid-etches a satin finish, single or double side, for privacy without losing daylight.

Light transmission≥ 91 %
Iron content≤ 0.015 %
Thickness3–19 mm
FinishAcid-etched satin
Ultra-clear low-iron glass with high light transmission Low iron

Specification

What ultra clear and frosted glass can you produce?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

SubstrateLow-iron float, iron content 0.015 % or less
Light transmission91 % or higher at 6 mm
Edge colourNear colourless, no green cast
Thickness3, 4, 5, 6, 8, 10, 12, 15 and 19 mm
FrostingAcid-etched, single or double side
Surface optionsSatin, anti-fingerprint coating, anti-reflective on request
Maximum size3,300 × 9,000 mm
Build-upsMonolithic, laminated, insulating, printed
StandardsEN 572-2, EN 12150 for tempered

Applications

Where is ultra clear glass used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01High-end retail

Display cases and shopfronts where a green edge would spoil a neutral palette.

02Furniture and interiors

Table tops, shelving and partitions with a true colour-neutral look.

03Shower and bath

Frosted tempered panels with an anti-fingerprint coating that wipes clean.

04Solar and display

Cover glass for photovoltaic modules and display screens where transmission matters.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is low-iron glass packed for export?

Low-iron glass shows every fingerprint, so panels are cleaned, wrapped and handled with gloves at packing. Frosted panels get an interleaving film to stop surface marking in transit.

  • Panels cleaned and wrapped in PE film
  • Foam interleaving between frosted panels
  • Gloves used at every handling step
  • Crates marked to keep dry
  • Packing photos before loading

Approvals

What standards and test reports come with it?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

CE — EN 12150 China CCC ISO 9001:2015

Questions

What buyers ask first

Why does ultra clear glass cost more?
Low-iron sand and a tighter melting process cost more than standard float, and fewer plants make it. The premium is usually 15 to 25 % over clear float — worth it for exposed edges and light-coloured interiors.
Does frosted glass show fingerprints?
Standard acid-etched glass does. For bathrooms and high-touch surfaces we supply an anti-fingerprint coating that makes the surface easier to clean. It adds cost but saves maintenance complaints.
Can frosted glass be tempered and laminated?
Yes. Frosting is done before tempering, and frosted panes can go into a laminated build-up. For exterior use we recommend laminating so the frosted face is protected inside the laminate.
What is the difference from standard float glass?
Standard float has about 83–84 % light transmission and a visible green edge because of its iron content. Low-iron glass gets to 91 % and stays neutral, which matters when the edge is exposed or when you are matching white surfaces.

Send the drawing,
we will send a price.

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

Ultra clear glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Low-iron carries a premium over clear float that rises with thickness, and frosting or coating is quoted per surface, so we price the build-up you specify.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.