EN 1063 · UL 752

Bullet-resistant
laminated glass

China Glass Factory builds bullet resistant glass in Qinzhou, China, to EN 1063 BR4 to BR7 and UL 752 Level 1 to 3, in 24 to 60 mm assemblies of 3 to 7 plies up to 2,400 × 3,600 mm. Weight runs 50 to 130 kg per m², so the frame specification ships with every panel.

EN 1063BR4 – BR7
UL 752Level 1 – 3
Glass plies3–7
Thicknessup to 60 mm
Bullet-resistant laminated glass assembly produced on the in-house laminating line Security glazing

Specification

What bullet resistant glass can you supply?

These are the limits of our own lines, not a catalogue range. If your drawing sits outside one of them, tell us and we will say so before you spend time on a tender.

ClassesEN 1063 BR4, BR5, BR6, BR7; UL 752 Level 1, 2, 3
ConstructionMulti-layer PVB with glass plies, or glass / polycarbonate / glass
Thickness24 mm to 60 mm depending on class
Number of plies3 to 7
Weight50 to 130 kg per m²
Maximum size2,400 × 3,600 mm depending on build-up
Edge finishPolished and sealed, or framed
Spall protectionAnti-spall film available on the protected face
DocumentationTest report with the class and the tested build-up

Applications

Where is bullet resistant glass used?

Same product, different build-up. Send the application and the design load, and we will propose the configuration rather than quote the nearest standard panel.

01Bank counters

Teller windows and counter screens at BR4 or higher, with a speech aperture or intercom.

02Jewellery and luxury retail

Display windows that resist smash-and-grab as well as ballistic attack.

03Government and embassy

Guard booths and reception screens specified by the security consultant.

04Cash in transit

Vehicle glazing where weight and thickness are constrained by the body.

Export packing for architectural glass — end-cap and steel frame crates for container shipment to Manila and Cebu

Packing

How is security glass packed and shipped?

Security glass is heavy — a 30 mm panel is 75 kg per square metre. Crates are built for the weight, with a mechanical lifting point, and the edges are sealed against moisture.

  • Heavy-duty timber crate with lifting eyes
  • Edge seal protected by foam profile
  • One panel per slot, no contact between panes
  • Weight and centre of gravity marked
  • Installation sequence numbered

Approvals

What standards and test reports come with it?

Certificates are issued in the manufacturer's name, and the test reports travel with the shipping documents so your consultant can review them before the glass arrives.

EN 1063 test report UL 752 on request ISO 9001:2015

Questions

What buyers ask first

Which class do I need?
It depends on the threat assessment, which is the security consultant's call, not ours. As a rule: BR4 handles handguns up to .44 Magnum, BR6 covers 7.62 × 51 rifle rounds, and BR7 is for high-power rifle threats. Tell us the class and we build to it.
Is bullet-resistant glass the same as bullet-proof?
No glass is bullet-proof. Every class is rated against a specific weapon and ammunition at a specific distance. A BR4 panel will stop repeated handgun rounds but will fail against a rifle — we always quote the exact class tested.
Can it be installed in a normal frame?
No. These panels weigh 50 to 130 kg per square metre and the frame has to take both the weight and the impact. We supply a frame specification and fixing detail with every order, and the frame must be anchored to structure, not to plasterboard.
Do you supply curved security glass?
Not in the high classes — bending a laminated security build-up destroys the interlayer performance. For curved applications we can supply flat panels set in a faceted frame, which is what most banks actually do.

Send the drawing,
we will send a price.

Tell us the build-up, the quantity and the destination port. You will get a specification review and an indicative price within one working day — reviewed by an engineer, not a bot.

Bullet resistant glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Class, build-up, thickness and the largest panel set the number, so we quote the tested build-up you specify.

ContactWang Zhi · Export Sales

We reply within one working day. Drawings in DWG, PDF or Excel are welcome.

How is it shipped to the Philippines?

Bullet-resistant glass is supplied to Philippine projects from our own plant in Qinzhou, China. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7-15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Manila and Cebu have their own pages.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.