Technical answers on architectural glass
Short, figure-backed answers to the questions buyers and specifiers ask most. Figures dated 2026-11-02; sizes are manufacturing limits, not project guarantees.
What is the maximum size of tempered glass available from a Chinese manufacturer?Most Chinese tempering lines stop at 2,440 × 5,100 mm. Jumbo lines reach 3,300 × 12,000 mm, and the largest ar… What is the difference between EI, EW and E fire-rated glass?E blocks flames and smoke only. EW adds a limit on radiant heat. EI adds a limit on temperature rise on the un… What is heat soak testing (HST) and when is it required for tempered glass?Heat soak testing re-heats tempered glass to about 290 °C for two hours so that any pane containing nickel sul… How is the U-value of an insulating glass unit calculated, and what value should a hot-climate project specify?The U-value of an IGU is the centre-of-glass value calculated to EN 673 or ISO 10292; add the frame and spacer… What should a contractor check before buying architectural glass from a Chinese factory?Six things: the certificate numbers, not the logos; the maximum furnace size against your largest panel; wheth… What are the limits of curved tempered glass for a facade?Typical Chinese curved tempering lines handle an arc up to 3,300 mm, a height up to 9,000 mm and a radius down… Can tempered glass be cut after tempering?No. Any cut through a tempered pane releases its stress pattern and the sheet fragments. Sizes, holes and edges are fixed before the furnace. How long does tempered glass last?No expiry date, and no standard sets a service life. Edge damage, nickel sulphide inclusions and frame movement end a pane, not age. How do you get a PS licence for imported glass in the Philippines?The PS licence is issued to the manufacturer, not the importer. Per shipment the importer files the SOC. Here is what the factory hands over.