Speciality glass: ultra-clear, mirror, back-painted, etched, patterned, wired

China Glass Factory produces eight product families outside the standard tempered / laminated / insulating range, all made or processed in our own plant in Qinzhou, China. Cut to size, edge-worked, and shipped with the same documentation as the main range. Verified 8 November 2026.

The short answer

Speciality glass is where a project's design intent is decided. A curtain wall can be technically correct and still look wrong because the glass reads green instead of white, or because the frosted partition shows every fingerprint. The eight families below cover the requests that most often arrive after the main glazing package has been priced: low-iron ultra-clear for colour neutrality, mirror for interior walls, back-painted for colour, acid-etched for privacy with cleanability, patterned for both, wired for fire and security, borosilicate for heat, and vacuum units where depth is not available.

What are the eight speciality glass families?

ProductWhat it doesTypical useThickness range
Low-iron ultra-clearRemoves the green cast; edge reads water-whiteThick laminates, glass fins, display, high-end facades4–19 mm
Silver mirrorCopper-free or copper-backed reflective coatingGym, lift, bathroom, feature walls3–6 mm
Back-painted (lacquered)Colour behind the glass; glass protects the finishKitchen splashback, lift interior, reception, wardrobe4–12 mm
Acid-etched / frostedSatin surface for privacy, smooth to the touchPartitions, doors, balustrades, signage4–19 mm
Patterned (rolled)Texture, privacy, anti-slipDoors, screens, canopies, stair treads3–12 mm
WiredMesh holds the glass after crackingFire doors, roof lights, heritage work6–10 mm
BorosilicateVery low thermal expansionSight glasses, high-temperature viewing windows3–12 mm
Vacuum insulatingLow U-value at roughly a third of the depthRetrofit, heritage windows, cold display8–12 mm assembly

Why does ultra-clear glass turn green at the edge?

Ordinary float glass contains iron oxide. At 6 mm nobody notices. At 15 mm, laminated three layers deep, or standing on edge as a glass fin, it reads distinctly green — and on a white or grey building that green is the first thing an architect rejects.

Low-iron glass is made from a reduced-iron batch. Three practical consequences:

On a Philippines project, ultra-clear is most often requested for lobby and retail glazing, lift lobbies and glass balustrades at podium level. For a standard tower vision panel the colour difference is not visible and the premium is not justified.

Why does back-painted glass fail, and how do you specify it?

The paint sits on the back face; the glass protects it. That is the whole appeal. The failure mode is always the same — moisture reaching the coating from an unsealed edge, and the paint lifting in a visible bloom.

ItemWhat to specifyWhy
CoatingWaterproof solvent-based or UV-cured lacquer, not interior wall paintStandard paint fails in humid service
EdgesSealed, or the panel set in a frame that shields the edgeEdge ingress is the single most common failure
Back faceOptional protective backing film or aluminium foilProtects against substrate moisture and adhesive contact
ColourSample approved against the actual lacquer, not a paper swatchLacquer colour shifts subtly between batches

Acid-etched or sandblasted, which should you specify?

Both give a frosted appearance at arm's length. They behave differently the moment someone touches them.

Acid-etchedSandblasted
SurfaceSmooth satin, chemically attackedCoarser, slightly directional
FingerprintsWipe offCan be trapped in the profile
CleaningStandard glass cleanerNeeds more care; can polish unevenly
Where it belongsAnything within reach: partitions, doors, balustradesDecorative, out of reach, or where a deeper texture is wanted

The practical rule: if a hand will touch it, etch it; if it is above head height and the texture is the point, sandblast it.

Where is wired glass still the right answer?

Wired glass has been largely displaced in new-build by modern fire-rated glazing, and that is correct. It remains a legitimate specification where:

One production note that catches people out: wired glass cannot simply be tempered after the mesh is inserted the way plain glass can. If the specification calls for both wire and tempered performance, the requirement has to be raised before the order is released.

When should you use borosilicate or vacuum glass?

Borosilicate is a different glass, not a coating. It is specified for genuinely low thermal expansion — sight glasses, high-temperature viewing windows, laboratory and stove glazing. If the application only needs to survive heat rather than to avoid expansion, tempered soda-lime glass is cheaper and should be considered first.

Vacuum insulating glass reaches roughly double-glazing performance at about a third of the thickness, which is why it appears in heritage retrofit and cold display. It is a specialist unit with a smaller maximum size and a higher price per square metre, so it is normally used only where the rebate genuinely will not accept a 24 mm cavity.

How is speciality glass shipped to the Philippines?

All eight families are supplied to Philippine projects from our own plant in Qinzhou. Test reports for heat-strengthened and fully tempered flat glass are provided on request. The PS licence itself is held by the local manufacturer and the ICC is applied for by the importer. Shipments are quoted FOB Qinzhou or CIF Manila, Cebu or Davao, minimum one 20ft container, production 7–15 days after order confirmation. Port, duty and documentation details are on the Philippines market page; Metro Manila and Cebu have their own pages.

Speciality glass price Philippines: Price from USD ___ per sqm FOB Qinzhou. Ultra-clear, mirror, back-painted, etched, patterned, wired, borosilicate and vacuum each carry their own price, so we quote against your schedule rather than a single family rate.

Questions this page answers

What is the difference between ultra-clear and ordinary clear glass? Iron content. Low-iron glass removes the green edge colour and the colour shift through thickness, at a 15–30% premium. Specify it where the glass is seen in section.

Is back-painted glass suitable for a kitchen or bathroom? Yes, with a waterproof solvent-based or UV-cured lacquer and sealed edges. Interior wall paint will fail in humid service.

Acid-etched or sandblasted? If a hand will touch it, etch it. If it is out of reach and the texture is the point, sandblast it.

Where is wired glass still specified? Fire doors, roof lights and heritage reinstatement. It cannot be tempered after the mesh is inserted.

Do you supply borosilicate? Yes, quoted separately with its own lead time. Consider tempered soda-lime first if the need is heat resistance rather than low expansion.

What is vacuum insulating glass used for? Where a low U-value is needed in a thin assembly — heritage retrofit, cold display, shallow rebates.

Can speciality glass be tempered or laminated? Most of it. The two exceptions worth knowing are wired glass and keeping the etched face away from the interlayer.

What do we need to quote your speciality glass?

Send the schedule with thickness, colour, edgework and the surface finish required, and it will be quoted against the actual product rather than a generic range. Two things make a quotation accurate on the first pass: the colour reference for back-painted or patterned glass, and whether the finished panel will be tempered, laminated or both.

Performance Interior and retail Philippines market page Curtain wall and facade glass Certificate list What we do differently

Enquiries: info@cnglassworks.com — answered within one working day, in English.

Last updated: 2026-11-21. China Glass Factory, Qinzhou, China. Prices are indicative FOB Qinzhou and confirmed against your drawing.